Proximity Switch E2E-C04S12-WC-C1
- Range: 0-1.2mm
- Switch housing: Ø4; Connection: Lead 2m
- Waterproof class: IP67
- Maximum working current: 100mA
- Overall length: 25.1mm
Inductive Sensor, 0 - 1.2 mm Range, Flush, NPN-NO, 10-30 VDC, E2E Next Series.
Working principle of proximity switch E2E-C04S12-WC-C1-2M
1.There is a high frequency transmitter in the proximity switch that causes the coil to emit a high frequency magnetic field
2.The proximity of the tested object to the high-frequency magnetic field will generate eddy current on the surface of the tested object, and the eddy current will trigger the magnetic field
3.the transmitter is affected by the magnetic field caused by the eddy current and stops the vibration
4.through the vibration of the control output ON/OFF
NO is normally open, the contact is disconnected when no object is detected, and the contact is closed when an object is detected.
NC is normally closed, the contact is closed when no object is detected, and the contact is disconnected when an object is detected.
Sensor type: Inductance